Network Setup - D-Link DCS-5220 User Manual

Section 3 - Configuration
LAN Settings: Settings for your local area network.
DHCP: Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be assigned to your camera
automatically.
Static IP Client: You may enter a static or fixed IP address for your camera.
IP Address: Enter an IP address.
Subnet Mask: The default value is "255.255.255.0." This helps to determine if the
designated IP address is on the same subnet.
Default Gateway: The gateway used to forward frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to a
different subnet. Usually the IP address of your router.
Primary DNS: Primary domain name server that translates names to IP addresses.
Secondary DNS: Secondary domain name server to backup the primary one.
Enable UPnP Allows a user to find, view, and control this camera via a presentation
Presentation: page or "Network Neighborhood" without configuration.
How does UPnP work?
UPnP networking technology provides automatic IP configuration and
TM
dynamic discovery of devices added to a network. Services and capabilities
offered by networked devices, such as printing and file sharing, are
available among each other without bothersome network configuration.
In the case of Network Cameras, you will see Network Camera shortcuts
at My Network Places.
D-Link DCS-5220 User Manual

Network Setup

36