Using 3Gpp Mobile Phones - D-Link DCS-5220 User Manual

Section 3 - Configuration
To view streaming media using mobile phones, make sure the Network Camera is setup on the Internet.
To utilize this feature, please check the Network Settings for your camera.
1. Most of the players on 3GPP mobile phones do not support RTSP authentication. Make sure the
authentication mode of RTSP streaming is set to Disable. For more information, see page 44.
2. The 3G network bandwidth is limited, therefore users cannot use large size videos. Please set the
video and audio streaming parameters as listed below. For more information, see Audio and Video
on page 51.
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3. Set the RTSP port to 554, since most ISPs and players do not support other port numbers.
4. Launch the players on 3GPP mobile phones, (ex. Real Player). Type the URL command in the
player.
URL Command = rtsp://<public ip address of your camera>:<rtsp port>/<access name for stream1/
stream2>
D-Link DCS-5220 User Manual

Using 3GPP Mobile Phones

MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
23