Configuration; D-Link Click'n Conenct (Dcc) - D-Link DCS-5220 User Manual

Section 3 - Configuration
Turn on the computer and Insert the D-Link DCS-5220 Driver CD in the CD-ROM drive. The step-by-step instructions
will help you to search and setup your Network camera smoothly and quickly.
If the CD Autorun function does not automatically start on your computer, click Windows
command box type "D:\DCS5220.exe", where D: represents the drive letter of your CD-ROM. If it does start, proceed
to the next screen.
DCC will show the MAC address and IP address of your DCS-5220. If you have a DHCP* server on your network, there
will be a valid IP Address displayed at the end of DCC process. You can begin to use the Network camera now.
*A DHCP server is a device that supplies IP Addresses to its
clients that are on the same network.
Click Start
D-Link DCS-5220 User Manual

Configuration

D-Link Click'n Conenct (DCC)

® Start > Run. In the Run
11