Creating A Raid 0 Set (Stripe) - Asus TW300-E5/PI4 User Manual

5.3.1

Creating a RAID 0 set (Stripe)

To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v7.6.0.1011 ICH9R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and cannot
[ ↑↓ ]-Select
2. Enter a name for the RAID 0 set, then press <Enter>.
3. Highlight RAID Level, press the up/down arrow key to select RAID 0
(Stripe), then press <Enter>.
4. Highlight the Disks item, then press <Enter> to select the hard disk drives
you want to include in the RAID set. The SELECT DISKS screen appears.
Port
0
1
2
3
Select 2 to 4 disks to use in creating the volume.
[ ↑↓ ]-Previous/Next
5. Use the up/down arrow key to highlight a drive, then press <Spacebar>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS TW300-E5/PI4
[ CREATE ARRAY MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
Create Volume
[ DISK/VOLUME INFORMATION
contain special characters.
[ESC]-Exit
[ SELECT DISKS
Drive Model Serial #
XXXXXX XXXXXX
XXXXXX XXXXXX
XXXXXX XXXXXX
XXXXXX XXXXXX
[SPACE]-Selects
]
GB
]
[ENTER]-Select Menu
]
Size Status
XX.XGB N o n - R A I D D i s k
XX.XGB N o n - R A I D D i s k
XX.XGB Non-RAID Disk
XX.XGB N o n - R A I D D i s k
[ENTER]-Selection Complete
5-11