Internal Connectors - Asus TW300-E5/PI4 User Manual

3.3.2

Internal connectors

1. Floppy disk drive connector (34–1 pin FLOPPY1)
This connector is for the provided Floppy Disk Drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other end to
the signal connector at the back of the floppy disk drive.
®
P5E WS PRO
P5E WS Professional Floppy disk drive connector
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
ASUS TW300-E5/PI4
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
3-11