Intel ® Matrix Storage Manager Option Rom Utility - Asus TW300-E5/PI4 User Manual

5.3 Intel
ROM Utility
The Intel Matrix Storage Manager Option ROM utility allows you to create RAID 0,
®
RAID 1, RAID 0+1, and RAID 5 set(s) from Serial ATA hard disk drives.
To enter the Intel
1. Turn on the system after installing all Serial ATA hard disk drives.
2. During POST, press <Ctrl+I> to display the utility main menu.
RAID Volumes:
None defined.
Physical Disks:
Port
0
1
2
3
[ ↑↓ ]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
The utility supports maxium four hard disk drives for RAID configurration.
5-10
Matrix Storage Manager Option
®
Matrix Storage Manager Option ROM Utility:
®
Intel(R) Matrix Storage Manager Option ROM v7.6.0.1011 ICH9R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Drive Model
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
[ESC]-Exit
[ MAIN MENU ]
Serial # Size
XXXXXXXX XX.XXGB
XXXXXXXX XX.XXGB
XXXXXXXX XX.XXGB
XXXXXXXX XX.XXGB
[ENTER]-Select Menu
]
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: RAID configuration