VIDEO INPUT
Select INPUT source by pressing INPUT button on Top Control or on
Remote Control Unit.
Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3
button on Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
When connecting to those equipment, select a type of Video
source in SOURCE SELECT Menu.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon.
2
Press POINT UP/DOWN buttons to move a red arrow pointer to
Input 2 and then press SELECT button. Source Select Menu will
appear.
3
Move a pointer to source that you want to select and then press
SELECT button.
When video input signal is connected to VIDEO jack,
Video
select Video.
Y,Pb/Cb,Pr/Cr
NOTE;
INPUT SOURCE changes if the INPUT 2 button on Remote Control
Unit is pressed.
When connecting to those equipment, select a type of Video
source in SOURCE SELECT (VIDEO) Menu.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon.
2
Press POINT UP/DOWN buttons to move a red arrow pointer to
Input 3 and then press SELECT button. Source Select Menu will
appear.
3
Move a pointer to source that you want to select and then press
SELECT button.
When video input signal is connected to VIDEO jack,
Video
select Video.
Y,Pb/Cb,Pr/Cr
When video input signal is connected to S-VIDEO jack,
S-Video
select S-Video.
NOTE;
INPUT SOURCE changes if the INPUT 3 button on Remote Control
Unit is pressed.
This Manual: http://www.manuallib.com/file/2671777
SELECTING INPUT SOURCE
DIRECT OPERATION
SELECTING INPUT SOURCE
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
When video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
WHEN SELECT INPUT 3 (AV TERMINALS )
When video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
INPUT button
Input 1
Input 2
Input 3
INPUT MENU
Input
SVGA 1
INPUT Menu icon
Input 1
Input 2
Move a pointer (red arrow) to
Input 3
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer (red
arrow) to Video or
Y, Pb/Cb, Pr/Cr and
press SELECT button.
INPUT MENU
Input
SVGA 1
Input 1
INPUT Menu icon
Input 2
Move a pointer (red arrow) to
Input 3
Input 3 and press SELECT
button.
Input 3
Source Select Menu (VIDEO)
Move a pointer (red arrow)
to
source
SELECT button.
and
press
31