Table of Contents
Advertisement
PREPARATION
FRONT OF CABINET
CAUTION
Do not turn on the projector with
the lens cap attached. High
temperature from light beam may
damage the lens cap and result in
fire hazard.
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
G Do not put a flammable object near this vent.
G Keep rear grills at least 3.3'(1 m) away from
any object, especially heat-sensitive object.
G Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
This Manual: http://www.manuallib.com/file/2671777
NAME OF EACH PART OF PROJECTOR
PROJECTION LENS
(optional)
LENS CAP
(optional)
POWER CORD
CONNECTOR
SPEAKERS
TERMINALS
AND CONNECTORS
LAMP COVER
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from
overheating. Pay attention to following to ensure proper ventilation
and avoid a possible risk of fire and malfunction.
G Do not cover vent slots.
G Keep side clear of any objects. Obstructions may block cooling
air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
TOP CONTROLS
AND INDICATORS
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7
Advertisement
Table of Contents
