Changing The Holding Time; Restoring The Factory Settings - Miele Laboratory Glassware Washer G 7883 Operating And Installation Instructions

Changing the holding time

Step
^ Press and hold the
with the desired program block appears in the
display.
^ Set the program selector to the program you
wish to change, e. g., Custom.
^ Press and hold the
required value appears in the display,
e.g., 10.

Restoring the factory settings

Step
^ Press and hold the
appears in the display.
^ Turn the program selector to a program.
Default factory setting(s):
Re-programmed setting(s):
^ When PP appears in the display, press the
button.
The water softener has been restored to the factory settings. Reprogramming is
required (see "Programming the water softener").
Program changes to the open programs "Custom", "Inorganica" and "Organica"
remain unchanged.
button until the level
button until the
button until E33
Programming functions
Display / Result
E10 for Main Wash 1
E13 for Main Wash 2
E23 for Rinse 1
E26 for Rinse 2
1
min
min 10
Display / Result
E33
00
PP
00, the factory settings have
been restored.
39