Table of Contents
Advertisement
PCI/ISA System Board
If you want your computer to resume an IRQ event, you
can enable that IRQ. For example, if you have a net-
work card installed that uses IRQ 5, you may want to
turn IRQ 5 to On to allow the computer to resume when
the network polls the system.
PCI Configuration Setup
Use the arrow keys to highlight "PCI Configuration
Setup" and press <Enter>, a screen similar to the one
below will appear.
The G586VPM system board supports four PCI master/
slave slots. Each slot may be assigned INT A, B, C, D
or Auto if the card installed in the slot requires an
interrupt. Each INT may then be assigned an IRQ value.
Note:
We recommend that you assign all slots to Auto.
3-9 u Initial Setup Program
Advertisement
Table of Contents
