Manually adjusting seats
Read and observe
on page 81 first.
The seats can be adjusted by the respective operating element being pulled in
the direction of arrows, pressed or rotated.
Control elements on the seat
» Fig. 71
Adjusting the seat in the longitudinal direction (after releasing the control
A
lever must lock audibly)
Adjusting the seat height
B
1)
Adjust the tilt of the backrest (do not lean on the backrest when adjusting)
C
Setting the extent of the curvature of the lumbar support
D
Adjusting the front seats electronically
Fig. 72 Control elements on the seat
1)
Only valid for some countries.
82
Using the system
Fig. 71
Control elements on the seat
Read and observe
on page 81 first.
The seats can be adjusted by the respective operating element being pressed
in the direction of area of the arrow.
Control elements on the seat
» Fig. 72
seat adjustment
A
▶
1 - Move in the longitudinal direction
▶
2 - Change in inclination
▶
3 - Change in height
Adjusting the seat backrest
B
▶
4 - Change in inclination
Adjusting lumbar support
C
▶
5 - Change curvature
▶
6 - The degree of curvature change
Note
If the setting procedure is interrupted, you will need to press the operating el-
ement again.
Head restraints - adjusting height
Fig. 73
Front headrest: moving up and
down