Change bulb for long-distance, daytime running lights and parking
light switch
Read and observe
and
›
Turn the protective cap
» Fig. 243
B
›
Pull the holder until it stops in the arrow direction
›
Remove the holder in the direction of the arrow
›
Insert the bulb holder with the new bulb and turn opposite to arrow direction
as far as the stop.
1
›
Insert the protective cap
» Fig. 243
B
opposite to the arrow.
Change bulb for additional parking light
Fig. 246 Headlights with Xenon light: Bulb for additional parking light
Read and observe
and
›
Turn the protective cap
» Fig. 243
B
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
246.
1
232
Do-it-yourself
Fig. 245
Bulbs for main beam, daytime
running lights, and parking light
on page 230 first.
on page 231 in direction of the arrow.
» Fig.
245.
1
.
2
on page 231 and turn it in the direction
on page 230 first.
on page 231 in direction of the arrow.
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the bulb holder up to the stop.
›
Replace the bulb holder in the headlamp with the bulb.
›
Insert the protective cap
» Fig. 243
B
opposite to the arrow.
Change bulb for fog light switch - Variant 1
Fig. 247 Remove the fog lamp / bulb change - Version 1
Read and observe
and
Remove the protective grille and headlight
›
Insert in opening
» Fig. 247
the clamps for removing the full wheel covers
A
» page
212, Vehicle tool kit.
›
Loosen the protective grille by pulling the hook in the direction of arrow
›
Remove the protective grille in the direction of the arrow
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
With the key
» page
212, Vehicle tool kit unlock the locking
2
of arrow
.
3
›
Remove the headlight in the direction of arrow
on page 231 and turn it in the direction
on page 230 first.
.
2
C
.
4
.
2
.
1
in direction