Replacing bulbs in the rear light - Variant 1
Fig. 251 Outer part of the light: Basic light/light with LED diodes
Fig. 252 Inner part of the light: Basic light/light with LED diodes
Read and observe
and
Outer part of the lamp
›
Turn the bulb holder
» Fig. 251
B
it from the lamp housing.
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Replace the holder with the bulb into the lamp housing and turn in a clock-
wise direction to the stop.
Inner part of the light
›
Unscrew the lamp holder
» Fig. 251
and remove the lamp holder from the light assembly.
on page 230 first.
in an anti-clockwise direction and remove
with the screwdriver from the car tool kit,
›
Turn the respective light bulb
» Fig. 252
remove it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder in the tail lamp assembly.
›
Screw on the lamp holder carefully.
Replacing bulbs in the rear light - Variant 2
Fig. 253 Outer part of the light: Basic light/light with LED diodes
Read and observe
and
Outer part of the lamp
›
Turn the socket with the bulb
›
Remove the socket with the bulb from the lamp housing in the direction of
arrow
.
2
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Reinsert the holder with the bulb into the lamp housing and turn in the op-
posite direction of the arrow
1
until it stops counter-clockwise and
on page 230 first.
in the direction of
» Fig.
253.
B
1
to the stop.
Fuses and light bulbs
235