AUX and USB inputs
Read and observe
on page 89 first.
The AUX input is above the storage compartment in the front centre console
and is identified with the mark
The MDI input is above the storage compartment in the front centre console
and is identified by the symbol .
Additional
information»
Owner´s Manual Infotainment.
Multimedia holder
Introduction
This chapter contains information on the following subjects:
Install/remove
Handle holder
External devices (e.g. tablet, smartphone, etc.) measuring min. 122 mm and
max. 195 mm can be secured in the support.
The maximum permissible load of the holder is 750 g.
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Fig. 104
Installation locations of the AUX
and USB inputs
» Fig.
104.
Install/remove
Fig. 105 Position adapter/install holder
Fig. 106 Remove holder/remove adapter
99
Read and observe
100
Fitting
›
Attach the opened adapter to the guide rods of the headrest
›
Clip in the adapter in the direction of arrow
›
Clip the holder in the direction of arrow
Removing
›
Pull on the locking strap
›
Remove the holder from the bracket in the direction of arrow
›
Press the adapter and remove from the guide rods of the headrest in the di-
rection of arrow
.
5
WARNING
Carefully clip in the adapter - there is a risk of injuring your finger.
on page 99 first.
»
.
1
into the adapter.
2
in the direction of arrow
» Fig.
A
3
Transporting and practical equipment
» Fig.
105.
106.
.
4
99