Table of Contents
Advertisement
MS-6703 M-ATX Mainboard
Power Management
This item is used to select the degree (or type) of power saving and is related
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
Min Saving
Max Saving Maximum Power Management. Suspend Mode=1 Min
User Define Allows end users to configure each mode separately.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut
off. Settings: Disabled, 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min, 40Min,
1 Hour.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Activity of the se-
lected IRQ always awakens the system. Settings: 3, 4, 5, 7, 9, 10, 11, NA..
Hot Key Function As
This setting specifies the function of the preset hot key. Settings: Disabled,
Power Off, Suspend.
HDD Off After
If enabled and after the set time of system inactivity, the hard disk drive will
be powered down while all other devices remian active. Settings: Disabled, 1
Min ~ 15Min.
Power Button Function
This feature sets the function of the power button. Settings are:
Power Off
Suspend
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
3-20
energy. The information stored in memory will be used
to restore the system when a "wake up" event occurs.
Minimum Power Management. Suspend Mode=1 Hour
The power button functions as normal power off button.
When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Advertisement
Table of Contents
