Table of Contents
Advertisement
audio device. If so, the onboard audio controller will be enabled. If not,
the onboard audio controller will be disabled. If you want to use different
controller cards to connect audio connectors, set the field to Disabled.
Setting options: Disabled, Auto.
SIS S/W Modem
Auto allows the mainboard to detect whether a modem is used. If a modem
is detected, the onboard S/W modem controller will be enabled; if not, it
is disabled. Disable the controller if you want to use other controller
cards to connect a modem. Settings: Auto, Disabled.
SIS 1394 Controller
This item allows you to enable/disable the onboard IEEE1394 controller.
Setting options: Enabled and Disabled.
SIS 10/100M ETHERNET
The field determines whether the onboard LAN controller is activated.
Setting options: Enabled, Disabled.
Onboard Lan Boot ROM
The items enable or disable the initialization of the onboard LAN Boot
ROM during bootup. Selecting Disabled will speed up the boot process.
Onboard Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it. If you install add-on FDC or
the system has no floppy drive, select Disabled in this field. The settings
are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second
BIOS Setup
3-17
Advertisement
Table of Contents
