S2403H-Ei Ethernet Switch; Appearance; Front View - Huawei Quidway S2000-EI Series Installation Manual

Installation Manual
Quidway S2000-EI Series Ethernet Switches

1.3 S2403H-EI Ethernet Switch

The S2403H-EI Switch falls into two models: S2403H-EI-AC and S2403H-EI-DC.
They differ only in the sense that the former is AC-powered and the latter is
DC-powered. Throughout the rest of the manual, both of them are referred to as
S2403H-EI if not otherwise stated.

1.3.1 Appearance

Figure 1-8 S2403H-EI Switch

1.3.2 Front View

I. Front panel
On S2403H-EI front panel distribute one power LED (PWR), two status mode LEDs
(A/L and D/S), one status mode control button (referred to as MODE button
throughout the rest of the manual), 25 fixed 10Base-T/100Base-TX auto-negotiation
electrical ports, one expansion slot, and one Console port. The 25 fixed ports are
RJ-45 connectors, each with one yellow LED on the left and one green LED on the
right. See the following figure.
(1) (1)
(2) (2)
(3) (3)
(4) (4)
(1) PWR LED
(3) D/S mode LED
(5) 24 fixed electrical ports
(7) Port LED (right)
(9) Expansion slot
Figure 1-9 S2403H-EI front panel
(6) (7) (6) (7)
(5) (5)
(2) A/L mode LED
(4) MODE button
(6) Port LED (left)
(8) No.25 fixed electrical port
(10) Console port
1-9
Chapter 1 Product Overview
(8) (8) (9) (9)
(10) (10)