Huawei Quidway S2000-EI Series Installation Manual page 5

Chapter 4 Powering on Switch for the First Time
The chapter introduces the booting process of S2000-EI Series Ethernet Switches,
including the power-on booting of the switch and the system initialization.
Chapter 5 BootROM and Host Software Loading
The chapter introduces several means to upgrade the software of S2000-EI Series
Ethernet Switches.
Chapter 6 Maintenance and Troubleshooting
The chapter introduces the problems that might occur during the installation and the
booting of S2000-EI Series Ethernet Switches and the respective solution.
Chapter 7 Optional Interface Modules
The chapter introduces the interface modules supported by S2000-EI Series Ethernet
Switches.
Appendix A Lightning Protection of the Switch
The appendix introduces lightning protection of the switch.
Intended Audience
The manual is intended for the following readers:
Network engineers
Network administrators
Customers who are familiar with network fundamentals
Conventions
The manual uses the following conventions:
I. General conventions
Convention
Arial
Arial Narrow
Boldface
Courier New
Normal paragraphs are in Arial.
Warnings, Cautions, Notes and Tips are in Arial Narrow.
Headings are in Boldface.
Terminal Display is in Courier New.
Description