Interface Attributes - Huawei Quidway S2000-EI Series Installation Manual

Installation Manual
Quidway S2000-EI Series Ethernet Switches
Figure 7-3 1-port 100Base-T PoE interface module panel
Table 7-3 Description of the LEDs on the 1-port 100Base-T PoE interface module panel
LED
LINK
ACTIVE

7.2.2 Interface Attributes

The following table describes the interface attributes of the 1-port 100Base-T PoE
interface module.
Table 7-4 Interface attributes of the 1-port 100Base-T PoE interface module
Connector
Number of ports
Port attributes
Standard
PoE feature
Max. transmission segment
length over the selected
medium
OFF means the link is disconnected. ON means the link is connected.
OFF means no data is being received or transmitted. Flashing means data is
being received or transmitted.
Attribute
RJ-45
1
10 Mbps half/full duplex
100 Mbps half/full duplex
IEEE 802.3AF
supports long-distance power supply through idle wires or data
wires
100 m (328 ft) over the category-5 twisted pair cable
Chapter 7 Optional Interface Modules
Status description
Description
7-4