Module Interface Fiber - Huawei Quidway S2000-EI Series Installation Manual

Installation Manual
Quidway S2000-EI Series Ethernet Switches
Table 7-1 1Meaning of LEDs on 100Base-FX single-mode/multi-mode module panel
LED
LINK
ACT or ACTIVE

7.1.2 Module Interface Fiber

1-port 100Base-FX module ports match SC connectors.
Figure 7-2 SC optical fiber connector
Caution:
When connecting an SC connector, connect the switch-side Tx end and Rx respectively to the
network-side Rx end and Tx end.
The following table describes the interface attributes of the 1-port 100Base-FX
modules.
Table 7-2 Interface attributes of the 1-port 100Base-FX modules
Attribute
Connector
Number of ports
OFF means the link is disconnected. ON means the line is connected.
OFF means no data is being received or transmitted. Flashing means data is
being received or transmitted.
1-port 100Base-FX
single-mode
module
SC
1
7-2
Chapter 7 Optional Interface Modules
Status description
Description
1-port 100Base-FX
single-mode
medium-haul
module
1-port 100Base-FX
multi-mode module