Advertisement
Click "Start" button to update
Click "Log" in the Advance menu, you can find out the log toolbar at the bottom of
the software interface. Click "Log" again, the log toolbar will disappear from the
software interface. Shown as below picture:
Fig. 4.7 MSP 211 Control Software
Save，User can save current log to specified path to review.
Remove, User can remove the log.
Factory Reset：User can set the status to the factory status.
About
User can find out the software version and related information in "About" menu.
Fig. 4.8 MSP 211 "About"
MSP 211 User Manual
Doc No.：RGB-RD-UM-M211E001
7
Advertisement
