Problems With The Navigation Sys - Mercedes-Benz Comand Operating Instructions Manual

Problems with the navigation system
Problem
COMAND does not
resume route guidance
after the journey has
been interrupted.
Problem
COMAND is unable to
determine the vehicle's
position.
Problem
The digital map is not
compatible with the
vehicle software.
Problem
COMAND asks for an
activation code during
the map update.
Problems with the navigation system
Possible causes/consequences and M Solutions
Route guidance is canceled if you interrupt the journey for more
than two hours.
"Interrupting the journey" refers to stopping the vehicle.
"Continuing route guidance" refers to switching COMAND back on
and driving on.
Continue route guidance manually (
X
Possible causes/consequences and M Solutions
COMAND has to redetermine the position of the vehicle if the
vehicle has been transported.
Example:
After transporting the vehicle by ferry
R
After transporting the vehicle by motorail
R
Start the vehicle and pull away.
X
COMAND determines the vehicle's position. Depending on the
driving situation, this may take some time.
Route guidance may be restricted during the determination of
the vehicle's position.
When positioning is complete, route guidance is resumed with
navigation announcements and route guidance displays.
Possible causes/consequences and M Solutions
The data medium containing the digital map cannot be used for the
update.
To confirm the message: press the controller.
X
Remove the data medium.
X
Have the data medium checked at an authorized Mercedes-Benz
X
Center.
Possible causes/consequences and M Solutions
The digital map is secured with an activation code.
Consult an authorized Mercedes-Benz Center.
X
page 91).
Y
109
Z