Changing The Input Language For Handwriting Recognition - Mercedes-Benz Comand Operating Instructions Manual

Press the touchpad.
X
A symbol is shown.
To select p: glide your finger to the left
X
or right and press.
To select the desired input line: glide up or
X
down and press.
The selected input line is active and char-
acter entry can be continued.
Moving the cursor within the input line
Press the touchpad.
X
A symbol is shown.
To select p: glide your finger to the left
X
or right and press.
To move the cursor: glide to the left or right.
X
Changing the input language for hand-
writing recognition
Prerequisite: an input line for text, numbers or
characters has been selected.
Press the touchpad.
X
A symbol is shown.
To select B: glide your finger to the left
X
or right and press.
The list of available input languages
appears.
To select a language: glide up or down and
X
press.
The input language for handwriting recog-
nition has been changed.
Searching in lists
The phone book search is used as an exam-
ple.
You determine the first letter of the contact
you are looking for with the first character you
enter.
Draw the letter on the touchpad surface.
X
The first contact with the selected first
character is highlighted in the phone book.
Further information on handwriting recog-
nition on the touchpad (
Draw additional letters on the touchpad
X
surface one after another.
To complete the search and return to the
X
phone book: press the touchpad.
Switching between the controller and
the touchpad as input device
Prerequisite: an input line for text, numbers or
characters has been selected.
To switch from character entry using
X
the controller to handwriting recogni-
tion on the touchpad: use one finger to
press the touchpad.
Handwriting recognition on the touchpad is
active.
To switch from handwriting recognition
X
on the touchpad to character entry
using the controller: press the controller.
Character entry using the controller is
active.
Touchpad
29
page 27).
Y