Basic Functions - Mercedes-Benz Comand Operating Instructions Manual

Basic functions

30
Quick access for audio and telephone
Changing the station or music track
Depending on the audio source that is cur-
rently activated, you can use this function to
select the next station or music track.
Call up quick access (
X
The current audio source is displayed.
To select the previous or next station/
X
music track: glide to the right or left.
The selected station or music track is
played.
Changing the audio source
Call up quick access (
X
The current audio source is displayed.
To display the available audio sources:
X
glide down with one finger.
To select an audio source: glide your finger
X
to the left or right and press.
The selected audio source is played.
Sending DTMF tones
The function is not supported by all mobile
phones (see the manufacturer's operating
instructions).
X
page 26).
Y
X
X
page 26).
Y
Adjusting the volume for media sources
X
or
X
Call up quick access during a call
( page 26).
Y
To select the desired characters: glide to
the left or right respectively and press.
Every character selected will be transmit-
ted immediately.
Basic functions
Switching COMAND on/off
Press the q control knob.
When you switch on COMAND, a warning
message will appear. COMAND calls up the
previously selected menu.
If you switch off COMAND, playback of the
current media source will also be switched
off.
Adjusting the volume
Turn the q control knob.
Press the W or X button on the mul-
tifunction steering wheel.
The volume of the media source currently
selected changes.