Real-Time Traffic Report - Mercedes-Benz Comand Operating Instructions Manual

Real-time traffic reports
96
To select Details: turn and press the con-
X
troller.
The report shows the following information:
State/province, road and display of the
R
affected direction
Section of the road to which the traffic
R
report applies
Traffic icon and traffic report
R
To close the detailed display: press the
X
% button.
Displaying reports on the route
The function is only available while route guid-
ance is active. It shows the available traffic
reports affecting the current route.
If there are no reports for the route or the
function is not supported in the selected lan-
guage: the Messages On Route
gray and cannot be selected.
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic: turn and press the con-
X
troller.
To select Messages On
X
press the controller.
The traffic report window appears. Several
traffic reports may be available for the cal-
culated route, marked for example by 1/4.
The report shows the following information:
R
R
R
To display the next/previous traffic report:
X
turn the controller.
To close the display: press the % button.
X
Displaying all traffic reports
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic: turn and press the con-
X
troller.
To select
X
menu item is
the controller.
A list is shown containing all roads, areas or
regions affected by traffic reports. Roads,
areas or regions not on the route also
appear in the list.
To select the road, area or region: turn the
X
controller and press to confirm.
Route: turn and
The traffic report is displayed (
There may be several traffic reports for the
affected road.
To close the display: press the % button.
X
State/province, road and display of the
affected direction
Section of the road to which the traffic
report applies
Traffic icon and traffic report
All Messages: turn and press
page 96).
Y