Bluetooth Settings; Setting The System Language; Activating/Deactivating - Mercedes-Benz Comand Operating Instructions Manual

Setting the system language

48
Changing the name of the SSID (USA)
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select System
X
controller.
To select WiFi: turn and press the control-
X
ler.
The WiFi menu appears.
To select Change
X
controller.
A dialog for entering the SSID appears.
Enter the new SSID.
X
To select ¬: turn and press the control-
X
ler.
The new SSID is shown on the device to be
connected and in the
Security Key menu.
i
Device connections established using the
previous SSID will no longer work after the
SSID is changed. You have to reconnect
these devices (
Y
®
Bluetooth settings
General information about Blue-
®
tooth
®
Bluetooth -capable devices, e.g. mobile
phones, have to comply with a certain profile
Settings: press the
SSID: turn and press the
Connect Using
page 45).
in order to be connected to COMAND. Every
®
Bluetooth device has its own specific Blue-
®
tooth name.
®
Bluetooth technology is a standard for
short-range wireless data transmissions up to
approximately 10 meters. You can use Blue-
®
tooth to connect your mobile phone to
COMAND to, for example:
use the hands-free system
R
establish an Internet connection
R
listen to music using Bluetooth
R
exchange vCards
R
®
Bluetooth is a registered trademark of Blue-
tooth Special Interest Group (SIG) Inc.
Activating/deactivating Bluetooth
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System Settings: slide 6,
X
turn and press the controller to confirm.
A menu appears.
To select Activate Bluetooth: turn and
X
press the controller.
This switches Bluetooth
Setting the system language
This function allows you to determine the lan-
guage for the menu displays and the naviga-
tion messages. The selected language affects
the characters available for entry.
i
The navigation announcements are not
available in all languages. If a language is
not available, the navigation announce-
ments will be in English.
i
When you set the system language, the
language of the Voice Control System will
change accordingly. If it is not supported by
®
Audio
®
®
on O or off ª.