Introduction - Mercedes-Benz Comand Operating Instructions Manual

To select G: slide 9 the controller.
X
To select Save: turn and press the control-
X
ler.
The contact has now been saved. The con-
tact is identified by the ¥ symbol in the
phone book.
i
Saved contacts are also displayed in the
address book.
Saving or editing the contact data on
COMAND does not change the contacts on
the mobile phone. If automatic calling up of
phone contacts is activated, COMAND dis-
plays the copy ¥ with the changed data.
Deleting a contact
You can delete contacts that have been
added, supplemented, saved or imported in
COMAND.
If there are one or several phone numbers
saved under the contact, the contact is
deleted from the phone book and the address
book.
If there are additional entries under the con-
tact, such as a navigable destination, only the
phone numbers are deleted. The contact is
retained in the address book with the remain-
ing entries.
Call up the phone book (
X
Search for and highlight a contact in the
X
phone book ( page 124).
Y
To select G: slide 9 the controller.
X
To select Delete: turn and press the con-
X
troller.
A prompt appears asking whether the con-
tact should be deleted.
To select Yes: turn and press the controller.
X
The phone number is deleted.
or
To select No: turn and press the controller.
X
The process is canceled.
Closing the phone book
To select & from the character bar: turn
X
the controller and press to confirm.
or
Press the % button.
X
Address book

Introduction

Always pay attention to traffic conditions.
Familiarize yourself with the address book
functions before beginning your journey.
You can use COMAND when the road and
traffic conditions permit. You could otherwise
become involved in an accident in which you
or others could be injured.
The address book displays all the contacts
from the various sources (mobile phone,
memory card, USB device, COMAND phone
book, navigation).
You can use the contacts to make telephone
calls, navigate and to write messages.
If a mobile phone is connected to COMAND
and automatic calling up is activated
( page 132), the mobile phone's contacts
Y
are displayed in the address book. If you dis-
connect the mobile phone from COMAND,
page 123). these contacts are no longer displayed in the
Y
address book.
When you import, save, edit or add contacts,
they will be saved in COMAND. These con-
tacts will remain there even when you con-
nect COMAND to a different mobile phone.
You can view these contacts even without a
mobile phone.
i
5000 contacts.
R
R
Address book
The address book can store a total of
2000 entries are reserved for perma-
nently saved contacts.
3000 entries are reserved for contacts
that you can load from the mobile phone.
127
Z