Rear Wheel Removal - Honda NT650 Owner's Manual

Rear Wheel Removal

1. Place the motorcycle on its center
stand.
2. Loosen the bearing holder pinch bolt.
Using the hook spanner turn the bearing
holder counterclockwise until it stops to
obtain maximum chain slack.
3. Remove the chain
sprocket and lay it to the outside of the
sprocket.
(1) Cap
(2) Cotter pin
(3) Wheel nut
from the rear
(4) Shim
(5) Axle center collar
(6) Axle
4. Turn the bearing holder clockwise until
it stops.
5. Remove the cap(l), cotter pin(2), wheel
nut (3), shim(4) and then remove the
axle center collar(5).
6. Attach tapes (7) to the wheel rim (8) and
brake caliper(9) to avoid damaging the
wheel.
(7) Tapes
(8) Wheel rim
(9) Brake caliper
(10) Drive pins
(11) Brake disc
71
F
R
A
M
E
/
W
H
E
E
L
S
/
B
R
A
K
E
S