[Display Setup] - Panasonic AJ-PX270 Operating Instructions Manual

Item
[DHCP SERVER]
[4G/LTE PROPERTY] [APN]
[USER ID]
[PASSWORD]
[DIAL NO.]
[NETWORK TOOLS] [LOG DISPLAY]
[STATUS DISPLAY]
[INITIALIZE]
[PING]

[DISPLAY SETUP]

Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[MENU DISPLAY]
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2]
[CENTER MARK]
[SAFETY MARK]
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME LVL]
[LEVEL GAUGE]
[FOCUS BAR]
[ZOOM/FOCUS]
[LEVEL METER]
Chapter 6 Menu Operations — Menu list
Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is
connected via wireless LAN.
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [ENABLE]
Sets the APN (Access Point Name) provided by the provider.
Sets the user name provided by the provider.
Sets the password provided by the provider.
Sets the phone number.
Displays the connection log.
Displays the network status.
Restores the network setting status to the factory settings.
Checks network connection using PING commands.
Selects the LCD monitor or the view finder as the location where the menu is displayed.
[LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder.
[LCD]: Displays the menu only on the LCD monitor.
f Factory setting: [LCD&EVF]
Sets the extraction level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [70%]
Sets the extraction level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [85%]
Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f Factory setting: [SPOT]
Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f Factory setting: [1]
Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f Factory setting: [2]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]...[100%]
f Factory setting: [90%]
Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [1.85:1], [2.35:1]
f Factory setting: [4:3]
Sets the level of the outside of the frame marker.
[0]...[15]
f Factory setting: [15]
Enables/disables level gauge.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides the focus bar indicating the degree of focus.
[ON], [OFF]
f Factory setting: [OFF]
Selects the unit of zoom and focus values.
[NUMBER]: Displays position values of zoom and focus from [0] to [99].
[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.
[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.
[OFF]: Neither zoom nor focus is displayed.
f Factory setting: [NUMBER]
Displays/hides audio level meter.
[ON], [OFF]
f Factory setting: [ON]
– 147 –
Description of settings
Description of settings