Panasonic AJ-PX270 Operating Instructions Manual page 141

Item
[COPY]
[EXPORT]
[IMPORT]
[REPAIR]
[RE-CONNECT]
[EXCH. THUMBNAIL]
[EXPLORE]
[AUTHENTICATE]
[CHANGE PARTITION NAME]
[DELETE LAST PARTITION]
[DELETE FOLDER]
[PROPERTY] [CLIP PROPERTY]
[CARD STATUS]
[CPS PASSWORD]
[SD CARD]
[REMAIN SETUP]
[FREE CAP. OF
PARTITION]
[THUMBNAIL SETUP] [INDICATOR]
[DATA DISPLAY]
[THUMBNAIL SIZE]
[PB POSITION]
Chapter 6 Menu Operations — Menu list
Copies the selected clip to a P2 card in any card slot or a storage device.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD], [STORAGE], [FTP], [FTP(PROXY)]
Exports (writes) from the P2 card or SD memory card to a storage device or FTP by units of card.
[ALL SLOT], [SLOT 1], [SLOT 2], [SLOT 3]: Exports clips from the P2 card to a storage device.
[SD CARD]: Exports from the the SD memory card to FTP.
Imports (writes back) clips, etc. from a storage device or FTP to the P2 card or SD memory card by units
of card.
[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD]
Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result of sudden power loss
during recording or other reasons.
If clips that were recorded over multiple P2 cards are not recognized as consecutive clips and the
incomplete clip indicator is displayed, use this function to restore the clips to the consecutive clips (the
original combined clips).
Changes the clip thumbnail to an image with any text memo. This can be executed while the text memo
clip is displayed.
Switches to the information display screen for storage device and network connection.
[STORAGE]: Switches to the information display screen for storage device.
[FTP]: Switches to the information display screen for FTP server.
When this menu is selected from the card status screen, a software keyboard is displayed to enter the
CPS password. If the password is entered and [OK] is selected, the CPS password is set to the camera.
When the set CPS password is successfully authenticated, the message [AUTHENTICATED
SUCCESSFULLY!] is displayed.
When the set CPS password authentication fails, a warning message is displayed.
When in USB host mode, sets/changes the partition name of the storage device.
f The default value is the date and time when the partition was created.
f This item is enabled only for the [TYPE S] storage device.
f This item is displayed only when the storage explore screen is displayed.
When in USB host mode, deletes the last storage partition.
f The partition can be deleted only when the cursor is placed on the last partition.
f This item is displayed only when the storage explore screen is displayed.
Delete folders in the storage device in the FAT format.
Detailed clip information is displayed on the screen. Items can be individually corrected.
Displays the card status of a card slot.
Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
Displays SD memory card information.
Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.
[REMAIN]: Displays remaining capacity.
[USED]: Displays used capacity.
f Factory setting: [REMAIN]
Displays available space in a partition.
Selects an item to display and press the control stick. Checked items are displayed. When [ALL HIDE] is
selected, other items cannot be selected.
[ALL HIDE]: Hides all indicators.
[MARKER]: Displays the shot mark indicator.
[TEXT MEMO]: Displays the text memo indicator.
[WIDE]: Displays the wide indicator.
[PROXY]: Displays the proxy indicator.
f Factory setting: [MARKER], [TEXT MEMO], [WIDE], [PROXY]
Selects the content to be displayed in the time code display area.
[TC]: Displays the time code.
[UB]: Displays the user bits.
[TIME]: Displays the record time.
[DATE]: Displays the record date.
[DATE TIME]: Displays the record date and time.
[CLIP NAME]: Displays clip names.
[USER CLIP NAME]: Displays a maximum of the first 15 letters (for an English language display) of a user
clip name.
[SLOT]: Displays slot number.
[THUMBNAIL TC]: Displays the time code of the thumbnail position.
f Factory setting: [TC]
Sets the thumbnail size displayed in a thumbnail on the screen.
[SMALL]: Small (thumbnail display: with 4×3 and property display)
[MEDIUM]: Standard (thumbnail display: 4×3)
[LARGE]: Large (thumbnail display: 3×2)
f Factory setting: [MEDIUM]
Sets the playback start position during playback from the thumbnail screen.
[RESUME]: Plays back from the position where playback stopped.
[THUMBNAIL TC]: Plays back from the time code of the thumbnail position.
[START TC]: Plays back from the start time code (beginning of the clip).
f Factory setting: [START TC]
– 141 –
Description of settings