[Audio Setup] - Panasonic AJ-PX270 Operating Instructions Manual

Item
[PROPERTY DISP.]
[THUMBNAIL INFO.]
[TEXT MEMO IND]
[STORAGE COPY [VERIFY]
SETUP]

[AUDIO SETUP]

Configure the settings regarding audio input/output.
Item
[INPUT SETTING] [INT MIC]
[INPUT1 MIC LEVEL]
[INPUT2 MIC LEVEL]
[INPUT1 LINE LEVEL]
[INPUT2 LINE LEVEL]
Chapter 6 Menu Operations — Menu list
Sets simple properties item displayed on the left of the thumbnail when [SMALL] is selected for
[THUMBNAIL SIZE].
[USER CLIP NAME]: Displays the user clip name.
[START TC]: Displays the start time code.
[REC DATE]: Displays the recorded date.
[REC TIME]: Displays the recorded time.
[NUM. OF AUDIO CH]: Displays the number of audio channels.
[AUDIO RATE]: Displays the audio sampling rate.
[AUDIO BIT]: Displays the audio bitrate.
[CREATOR]: Displays the person who recorded the clip.
[SHOOTER]: Displays the videographer.
[PLACE NAME]: Displays the shooting location.
[PROGRAM NAME]: Displays the program name.
[SCENE NO.]: Displays the scene number.
[TAKE NO.]: Displays the take number.
[REPORTER]: Displays the reporter.
[PURPOSE]: Displays the purpose of shooting.
[OBJECT]: Displays the object of shooting.
[START UB]: Displays the start user bits.
[REC RATE]: Displays the recording frame rate.
[LAST UP DATE]: Displays the date of last update.
[LAST UP PERSON]: Displays the last person who updated.
[MANUFACTURER]: Displays the equipment manufacturer name.
[SERIAL NO.]: Displays the serial number.
[MODEL NAME]: Displays the model name.
[ALTITUDE]: Displays an altitude.
[LONGITUDE]: Displays a longitude.
[LATITUDE]: Displays a latitude.
[1ST TEXT MEMO]: Displays the first text memo content.
[THUMBNAIL OFFSET]: Displays the thumbnail recording position.
Displays the number of selected clips and playback time of clip, etc.
[NUM. OF CLIPS]: Displays the number of selected clips at the lower right of the thumbnail screen.
[DUR. OF SEL CLIPS]: Displays the total playback time of selected clips.
[TOTAL DURATION]: Displays the total playback time of the displayed clip.
f Factory setting: [NUM. OF CLIPS]
Sets the display mode of the text memo indicator displayed for clips on the thumbnail screen.
[ALL]: Displays the indicator for all clips with text memos attached.
[HIDE CARD SERIAL]: Hides the text memo indicator for clips with only the following types of text memos
attached.
f Text memo with the serial number of card written
f Other text memos for which offset is not set with clip metadata
To record a text memo with the serial number of card written as metadata, set the main menu →
[RECORDING SETUP] → [REC META DATA] → [CARD SERIAL] to [ON].
Check [OFFSET] of [MEMO] on the clip properties screen to see whether offset is set for a text memo.
f Factory setting: [ALL]
Sets whether to verify or not when exporting in USB host mode.
[ON]: Verifies.
[OFF]: Does not verify.
Sets built-in microphone on/off and selects the directionality.
[STEREO]: Records audio from two directions in the front with the stereo microphone.
[MONO]: This mode records clearer audio from the front by enhancing the directionality forward like a
shotgun microphone. Audio recorded on the left and right are the same.
[OFF]: Disables audio of the built-in stereo microphone.
f Factory setting: [STEREO]
Sets the level of an external microphone connected to the <AUDIO INPUT 1> terminal. Enabled only when
a microphone is connected.
[−40dB], [−50dB], [−60dB]
f Factory setting: [−50dB]
Sets the level of an external microphone connected to the <AUDIO INPUT 2> terminal. Enabled only when
a microphone is connected.
[−40dB], [−50dB], [−60dB]
f Factory setting: [−50dB]
Sets the level of an external line input to be connected to the <AUDIO INPUT 1> terminal. Enabled only for
externally connected devices.
[4dB], [0dB]
f Factory setting: [0dB]
Sets the level of an external line input to be connected to the <AUDIO INPUT 2> terminal. Enabled only for
externally connected devices.
[4dB], [0dB]
f Factory setting: [0dB]
– 142 –
Description of settings
Description of settings