Connecting The Base Station - Datalogic Gryphon I GBT4400 Quick Reference Manual

Connecting the Base Station

3. The stand can now be repositioned in either horizon-
tal or standing position.
Connecting the Base Station
Figure 1 on page 5
terminal, PC or other host device. Turn off the host before
connection and consult the manual for that equipment (if
necessary) before proceeding. Connect the interface cable be-
fore applying power to the Base Station.
The Gryphon GBT44XX can also be Powered by the Terminal.
When powered by the Terminal, the battery charger is
automatically set as Slow charge.
For some specific interfaces or hosts or lengths of cable, the
use of an external power supply may be recommended for
full recharging capability (see
on page 34
Base Station Connection and Routing:
ble and Interface (I/F) Cable connectors into their respective
ports in the underside of the Base Station (see
connect to an AC Adapter, and plug the AC power cord into
the (wall) outlet.
4
Standing
shows how to connect the Base Station to a
for more details).
Horizontal
Technical Specifications
Fully insert the Power Ca-
Figure 1
Gryphon™ I GBT4400
). Then