Programming Mode - Datalogic Gryphon I GBT4400 Quick Reference Manual

LED and Beeper Indications

Programming Mode

reader is in Programming Mode.
INDICATION
Label Programming
Mode Entry
Label Programming
Mode Rejection of
Label
Label Programming
Mode Acceptance of
Partial Label
Label Programming
Mode Acceptance of
Programming
Label Programming
Mode Cancel Item
Entry
40
- The following indications ONLY occur when the
DESCRIPTION
A valid programming
label has been
scanned.
A label has been
rejected.
In cases where multi-
ple labels must be
scanned to program
one feature, this indi-
cation acknowledges
each portion as it is
successfully scanned.
Configuration
option(s) have been
successfully pro-
grammed via labels
and the reader has
exited Programming
Mode.
Cancel label has been
scanned.
LED
LED blinks Reader sounds
continu- four low fre-
ously quency beeps.
Reader sounds
three times at
N/A lowest frequency
and current vol-
ume.
Reader sounds
one short beep at
N/A highest frequency
and current vol-
ume.
Reader sounds
one high fre-
quency beep and
N/A
4 low frequency
beeps followed by
reset beeps.
Reader sounds
two times at low
N/A
frequency and
current volume.
Gryphon™ I GBT4400
BEEPER