Rear Panel Connections - Bauhn HDPVR2400 Instruction Manual

HIGH-DEFINITION PERSONAL VIDEO RECORDER - PVR

Rear Panel Connections

1. ANT IN
Used to connect an antenna.
2. ANT OUT (LOOP OUT)
Used to connect an extra analogue or digital receiver, VCR etc. .
Please connect LOOP pass through with supplied IEC Connector Cable
(M) with ANT IN (S) as shown above with red line correctly otherwise
twin tuners may not work correctly.
3. AUDIO L/R (White / Red RCA)
Connect to a TV audio input, HD Monitors audio input or an External
Audio Amplifier.
4. VIDEO (Yellow RCA)
Connect to a TV with video input.
5. YPbPr
Connect component video to HD Monitors (YPbPr Type).
6. DIGITAL AUDIO (Coaxial / Optical)
Connect to an External Audio Amplifier with S/PDIF Coaxial/Optical
Digital Audio.
7. VGA Connector
Connect component video to HD Monitors (VGA Type).
8. HDMI Connector
Connect High-Definition Multimedia output to HD Monitors (HDMI Type).
9. RS232 Serial Port
For firmware update, serial communication port (RS-232 – Cable not
supplied).
After Sales Support TEL: 1300 766 659
7