WARRANTY STATEMENT HDPVR2400 What your 2 year warranty means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over...
Page 3
INDEX After Sales Support TEL: 1300 766 659...
SAFETY AND INSTRUCTIONS CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE THE COVER. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make contact with any part inside the case.
PACKAGE CONTENTS Contents Please make sure the following accessories are supplied with the receiver. High-Definition Personal Video Recorder (PVR) Remote Control RCA Video/Audio Cable YPbPr Component Video Cable Batteries (2 X AAA Size) User Manual ...
HIGH-DEFINITION PERSONAL VIDEO RECORDER - PVR Front View – Display and Controls Front Panel Display Front panel window displays information concerning current operation such as Starting UP (Good), CH number (eg. C009). The blue LED lights up when power on and the PVR is operating, the green LED lights up ...
HIGH-DEFINITION PERSONAL VIDEO RECORDER - PVR Rear Panel Connections 1. ANT IN Used to connect an antenna. 2. ANT OUT (LOOP OUT) Used to connect an extra analogue or digital receiver, VCR etc.. Please connect LOOP pass through with supplied IEC Connector Cable (M) with ANT IN (S) as shown above with red line correctly otherwise twin tuners may not work correctly.
REMOTE CONTROL UNIT All features of the receiver can be controlled with the remote control. POWER: Press to switch between operation and standby mode. TV/RADIO: Press to switch between TV and RADIO mode. (MUTE: Press to mute the sound. Press again to turn sound on.
REMOTE CONTROL UNIT Recording Buttons Button Description of Function Start recording Stop recording STOP Playback Buttons Button Description of Function Start playback at the beginning of the current record session Play or return normal playback speed from fast forward or pause ...
Page 10
Remote Control Preparation Installing the batteries in the remote control Press down on the retaining catch on the lid of the battery recess on the remote control and remove the lid by sliding towards the end. Insert two AAA batteries into the recess, checking that the batteries are installed with the correct polarity, + away from the spring tensioners.
Page 11
Connect to your Home Theatre Equipment [TV, Audio Receiver, etc.] This section covers connecting the PVR to a TV or a computer monitor by various cable connections: Component Cable with audio by AUDIO L/R (red and white lead). HDMI using a HDMI cable (not supplied). RCA type yellow video lead with audio by AUDIO L/R (red and white lead).
Page 12
VIDEO 4. Connect the yellow video lead and AUDIO L/R (red and white lead) out connectors on the PVR receiver to the AV in on the back of the TV. Video lead connection is not shown on this diagram. Refer to the back view of the unit to ensure correct connection to Socket 4 on the PVR.