Timer Settings - Bauhn HDPVR2400 Instruction Manual

2. ADVANCED FUNCTIONS WITH THE PVR

2.6 Timer Settings

Using the / buttons to move to the right or left, select the Timer Settings Icon
It
is selected when the Timer Settings text appears, then press OK.
/
The following screen will appear. Use the Up/Down buttons to select the item
or press EXIT to cancel. In the sub-sections below the guide for changing the NO., Date,
Time, Mode, Event, Channel and TimLimit is explained
2.6.1 NO.
/
You can set up to 25 timer entries. Use the Up/Down buttons to select the NO.
item. Use the / buttons to move to the first or 1 timer. Use the Up/Down
/
buttons to the next item and so on making the changes as in this item by using
the / buttons. All changes below are done using the same change processes with the
remote. Date and time changes use the numeric keys. Repeat steps 1 to 7 for each timer
event. Move to Timer 2,3, etc. and make the changes as required. Look out for overlaps.
2.6.2 Date
Set the date of the program to record using the remote.
2.6.3 Time
You set the START time of the program you intend to record for Timer NO. 1. in 24 hour time.
2.6.4 Mode
Set the timer mode to be Off, a Once or a repeating Daily or Weekly event.
28
After Sales Support TEL: 1300 766 659