Starting Up For The First Time Or After A Factory Reset - Bauhn HDPVR2400 Instruction Manual

2. ADVANCED FUNCTIONS WITH THE PVR
2.1 <Starting up for the First Time or after a Factory Reset>
Turn on your TV and PVR. Ensure that you have all the necessary cables connected for your TV.
If it is the first time using the PVR, below is an explanation of all the menu settings.
2.1.1 Press the MENU button to bring up the following screen.
2.1.2 Using the > or < buttons to move to the right or left, select the Installation Icon (it
is selected when the Installation text appears as above. then press OK.
2.1.3 Choose Auto Search to automatically allow the PVR to scan in all TV and Radio Channels
which your PVR can receive. Press OK. (The default password is 0000) A warning screen
will remind you that all currently stored channels will be deleted.
2.1.4 If you wish to proceed, ensure you have the Yes button on the screen
highlighted, then press OK. After the scanning is complete you will then be able to
view/listen to the scanned in TV/Radio channels. This process is only really needed
on initial startup and after a factory reset mentioned in the Factory Reset section
below.
The quality of the signal is dependant upon many factors including, the aerial suitability for
digital TV, cabling from the aerial to the aerial socket in the wall, the aerial cable to the PVR etc.
If problems persist consult with a professional antenna installer. Information available for your
area here: http://www.dtvforum.info/index.php?showforum=82
17
After Sales Support TEL: 1300 766 659