Troubleshooting - Bauhn HDPVR2400 Instruction Manual

7. TROUBLESHOOTING

7.1 Trouble Shooting
Check the receiver according to the procedures detailed below. If the receiver does not
work properly after conducting Problem Solving Protocols, please contact the technical
department. This unit contains dangerous voltages, never remove the cover.
When not in use for a long period, it is recommended that you unplug the unit from the
main power socket.
Problem
No Power
No Reception
No Sound
No Video
The remote control is in
operation, but the receiver is
not responding
No Channels in the Channel
List
After Sales Support
Check the power cord for defects. Check mains power
switch is on. Press power button on RCU Check toggle
switch on back of unit is on.
Check the Signal Strength Indictor and check the
antenna cable and that the antenna has been inserted
correctly.
Volume may be set to low or audio muted. Check the
audio cable connection.
Change video output port or video display type.
Check the video cable connection.
Check the batteries for charge. Replace both
batteries at once. Never mix battery types. Check the
battery contacts.
Please rescan channels.
TEL: 1300 766 659
Solution
42