Video Settings (Output, Resolution, Outputfreq, Ratio, Colour Format) - Bauhn HDPVR2400 Instruction Manual

2. ADVANCED FUNCTIONS WITH THE PVR
2.3.2 < Video Settings >
In this menu, you can use the Left/Right / buttons to change the settings,
/
Up/Down buttons to select the item or press EXIT to cancel.
a. Output
You can switch between YPbPr and VGA mode
b. Resolution
You can select the display mode (1080i/720p/576i).
576i : a standard-definition (SD) video mode used in Australia. In digital applications
it's usually referred to as "576i", in analogue contexts it's often quoted as "625
lines".
720p: directly compatible with newer flat-panel technology such as plasma and LCD
and progressive-scan CRTs. 720p must be scan-converted for display on
interlace-only displays. 720p has a widescreen aspect ratio of 16:9, a vertical
resolution of 720 pixels and a horizontal resolution of 1280 pixels, or
1280x720.
1080i: a high-definition television (HDTV) video mode. The term usually assumes a
widescreen aspect ratio of 16:9, implying a horizontal resolution of 1920 pixels
and a frame resolution of 1920 × 1080 or about 2.07 million pixels.
c. OutputFreq
You can switch freq between 50Hz and 60Hz.
d. Ratio
You can switch aspect ratio between 4:3 and 16:9 Widescreen.
e. Colour Format
You can set Colour Format to one of Auto, PAL and NTSC. The receiver will automatically
convert and output the colour mode regardless of the current program's colour system.
After Sales Support TEL: 1300 766 659
21