Controls And Connections; Front Panel; Rear Panel - Bauhn ASB-811 Instruction Manual

Controls and Connections

Front panel

Standby: Press to switch the unit on or to standby.
1
2 LED Display: Displays currently watching channel number.
3 LED Indicator: Green when STB is ON; red when STB is on standby.
4 Remote Control Sensor: Receives the signal from the remote control
5 CH / : Press to change the channel up/down.
6 USB Port: Connect for PVR recording, media playback or software upgrades.

Rear panel

1
1 RF IN: RF IN is where you connect the Antenna.
2 RF OUT: RF signal output to another reception equipment such as TV.
3 L/R outputs: Left/right audio signal outputs to TV or amplifier.
4 Video output: Composite video output to connect to your TV.
5 HDMI output: HDMI to connect to your TV in high definition.
6 COAXIAL output: Digital sound output to connect to your TV or amplifier.
7 YPbPr ouput: Component video output to connect to your TV.
4
1 2
7
OUT
2 3
3 4 5
4 5
After Sales Support
Telephone:
Email:
6
6
1300 886 649
info@tempoaustralia.com.au