Bauhn HDPVR2400 Instruction Manual page 19

2. ADVANCED FUNCTIONS WITH THE PVR
2.2 Installation Menu
2.2.4 < Factory Default >
Deletes all the data and settings currently saved and brings the system to the initial status.
2.2.5 < Upgrade >
Upgrades the software. (The default password is 0000. It is recommended that this
option only used by qualified technician)
You may require WINRAR to open the firmware attachment. You can download this off the internet
for free by doing a search in Google under the name of WINRAR.
1) Download both the software and burner file onto your PC.
2) Connect the cable from the back of your PC (Com Port 1) to the back of the PVR using the 9
pin (straight through cable). For those that do not have a serial port on their computer you
can use a "USB to RS232 converter cable". Change it in Device Manager from COM6 or the
one that it installed to, to COM2, the closest one free from COM1 that is not in use.
3) Double click on burner file.
4) Burner Fields:
a. BAUDRATE:
b. COM PORT:
c. Click the Port Button to ON.
5) Firmware Fields:
a. Click the
(Melbourne_Green_flashFile_Update-APP-12.05.18.sec).
6) Click Connect Button and power on the box; wait until the text on progress bar changes to
'OK'. (Note: You only have 2-3 seconds to power the box on when you click the connect
button.)
7) Click Burn Button to start the upgrade process
8) Wait for the message, "UPGRADE FINISHED" to be shown.
After Sales Support
PVR UPGRADE INSTRUCTIONS
115200
COM 1
load button and
TEL: 1300 766 659
select the desired software file eg.
19