Settings Menu; Installation Settings; Antenna Setting; Auto Scan - Bauhn ASB-811 Instruction Manual

Settings Menu

Press the MENU button to open the main menu to view or adjust various settings
as decribed below and on the following pages. Press
setting category. Press
to select a setting option. Press EXIT button to go back to previous setting and press
MENU button to exit out of main menu.

Installation Settings

Antenna Setting

In order to get good and stable TV signal reception, set Antenna Setting to "On" if
you use an active antenna or an amplifier; or to "Off" if you use a passive antenna (no
amplifier).
Country Setting
Select your country of residence. This should be set to 'Australia'. Selecting another
country will affect channel scans.

Auto Scan

• Search and install all channels
automatically. This option overwrites all
preset channels.

Manual Scan

Search and install new channels manually.
This option adds new channels without
changing the current channels.
• Select Manual Scan then press the OK.
The channel search screen will appear.
• Press the /
channel frequency
• Press the OK button to start searching
channels
• If a channel is found, it will be saved
and added to the channels list. If channels cannot be found, it exits the menu
automatically.
10
/ buttons to select a menu setting. Press
button to select the
/ buttons to select a main
/
After Sales Support
Telephone:
Email: info@tempoaustralia.com.au
buttons
1300 886 649