Sharp MX-2300 G Installation Manual page 62

16) Install the saddle finisher to the main unit.
D. Punch position label attachment
1) Attach the label to the position indicated in the figure.
[For scanner] (package part No. 5)
No clearance
Second label
First label
Corner R end fitting
Corner R end fitting
Label attachment reference
* Corner of the
"upper cabinet rear"
[For RSPF] (package part No. 6)
R2.5 connection line
CAUTION Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
Edge line R 2.5
MX-2300/2700 N/G AR-PN1A/B/C/D 9 – 5
2) Apply the dust box label (package part No. 4) in position as
shown in the figure.
E. Turn on the power of the main unit
1) Connect the connector.
2) Connect the earth cord, and insert the power plug of the main
unit into the power outlet.