Table of Contents
Advertisement
12) After pushing the intermediate rail of accuride, insert the fin-
isher slide stopper (package part No. 7) between the rear slide
rail and the accuride.
Fix it with the coin screw (package part No. 10).
13) Install the front open/close cover (package part No. 4) to the
front rail stay rotating shaft, and fix it with the resin clip (pack-
age part No. 9).
1
14) Fix the punch cover (package part No. 5) together with the
band (metal fixture) with the fixing screw (package part No. 8).
2
15) Install the front cabinet upper with two screws.
2
1
MX-2300/2700 N/G MX-FNX1 6 – 4
D. Connector connection
1)
Remove the protection material and fixing tape.
1
2)
Remove the screw, and remove the connector cover.
3)
Connect the finisher connector with the main unit connector,
and tighten with a screw.
E. Staple position label attachment
1)
Attach the label to the position indicated in the figure.
[For scanner] (package part No. 11)
Corner R end fitting
Label attachment
Corner R end fitting
reference
* Corner of the
"upper cabinet rear"
2
Hide quick links:
Advertisement
Table of Contents
