Caring For Your Phone - Cisco SPA504 User Manual

For customers in AL, FL, GA, KS, SC, TN
Cisco SPA 500S Attendant Console
Figure 2 - Cisco SPA 500s 32 - Button Attendant Console
The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500 Series IP phone, providing
32 three-color (red, green, and amber) programmable LEDs, with support for a Busy Lamp Field and Line
Monitoring. The Cisco SPA 500S attaches to the IP phone with an attachment arm that is provided (not
shown). It obtains pwer directly from the IP phone and does not require a separate power supply. Two
Cisco SPA 500S units can be attached to a single IP phone to monitor a total of 64 separate lines.
Tip: Use CommPortal phone settings to program the buttons and PRINT the paper-tape.

Caring for Your Phone

The Cisco SPA 500 Series IP Phones are electronic devices that should not be exposed to excessive heat,
sun, cold, or water. To clean the equipment, use a slightly moistened paper or cloth towel. Do not spray or
pour cleaning solution directly onto the hardware unit.
8
MGCP.U.1304.O