Table of Contents
Advertisement
This appliance must be built in;
otherwise it could tip over.
To ensure that the appliance
functions correctly in tropical
climates where the ambient
temperature exceeds 38°C and air
humidity levels exceed 70%, the
appliance MUST be used in a
climate-controlled room.
Location
The appliance should be installed in a
dry, well-ventilated room.
The room temperature should not go
above or below the climate range for
which the appliance is designed.
The higher the ambient temperature of
the room, the more energy the
appliance requires to operate.
The appliance should not be installed
where it will be exposed to direct
sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator.
Climate range
The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Climate range
SN
N
ST
T
SN-ST
SN-T
If the appliance is used in a room that is
too cold, the cooling system will switch
off for too long, causing the internal
temperature in the appliance to rise,
with the risk of affecting the wine stored
there.
Ventilation
The air at the back of the appliance
gets warm. The appliance housing unit
must be constructed to allow sufficient
space for ventilation.
The air intake and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
Before installation
^ Before building in, remove all
accessories from the appliance.
^ Remove any cable clips from the rear
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrances.
Installation
Ambient room
temperature
+10°C to +32°C
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
+10°C to +38°C
+10°C to +43°C
29
Hide quick links:
Advertisement
Table of Contents
