Problem-Solving Guide - Miele KWT4154UG1 Operating And Installation Manual

Problem-solving guide

Repairs should only be carried out
by a qualified and trained person in
strict accordance with local and
national safety regulations.
Unauthorized repairs could cause
personal injury or machine damage
and may void the warranty.
With the aid of the following guide
minor problems can be corrected
without a service call.
What to do if . . .
. . . the appliance does not get cool.
^ Check whether the appliance has
been turned on. The temperature
display must be lit up.
^ Check that the plug is correctly
inserted in the power outlet.
^ Check that the fuse is not defective
and has not been tripped. Reset the
cicrcuit breaker.
. . . the appliance is kicking on too
frequently and for too long.
^ Check whether the ventilation slits
are covered or dusty.
^ The appliance door has been
opened too frequently.
^ Check that the door has been closed
properly.
22
. . . the alarm sounds and the
temperature display flashes.
^ Has the appliance door been open
for longer than 60 seconds?
If not, then the temperature is above or
below the set temperature. Possible
reasons:
^ The appliance door has been
opened too frequently.
^ the ventilation slits are covered.
^ there has been a lengthy interruption
to the power supply.
Once the problem has been resolved
the temperature display will light up
continuously, and the alarm will stop.
. . . a bar is lit up or flashing in the
temperature display.
Only temperatures within the range that
the appliance can display will be
shown. If the temperature is not within
this range, a bar will be displayed
instead.
. . . "F0" or "F1" appears in the
temperature display.
There is a fault. Contat MieleCare.
. . . you cannot turn the appliance off.
The safety lock has been activated.