System - DW megapix DWC-MB950TIR Instruction Manual

WEBVIEWER*
S e t u p > N e t w o r k > S t r e a m i n g
T h e c a m e r a c a n s t r e a m u s i n g U D P , T C P o r H T T P . T h e c l i e n t a p p l i c a t i o n
c o n n e c t i n g t o a c a m e r a c a n d i r e c t w h i c h p r o t o c o l t o u s e . T h e m e t h o d o f
s t r e a m i n g w i l l l i k e l y d e t e r m i n e t h e n e e d a n d e x t e n t o f a n y r o u t e r
c o n f i g u r a t i o n t h a t m a y b e r e q u i r e d .
The port settings all relate to camera ports. If streaming outside of a LAN (e.g. to the internet), then
routers on both the camera and client side need to provide necessary access for these ports.
The camera will stream via HTTP by default, which will use the HTTP port as defined in the
System – Generic Settings (80 by default). Streaming via HTTP often requires little or no router
configuration.
If the client application uses RTP over RTSP/TCP, then the camera will stream using the RTSP
Port, 554 by default.
RTP over UDP will stream using the RTP Video Port, starting at 6002 and can increment .
3 9