DW megapix DWC-MB950TIR Instruction Manual page 31

WEBVIEWER*
S e t u p > S y s t e m > M a i n t e n a n c e
U s e t h e M a i n t e n a n c e s e t u p p a g e t o u p g r a d e t h e f i r m w a r e , I m p o r t o r
E x p o r t S e t t i n g s , R e s e t t h e c a m e r a t o f a c t o r y d e f a u l t , o r r e b o o t t h e
c a m e r a .
Firmware Upgrade Using the SD Card- The SD card should be empty of any existing files
before proceeding.
1. Rename the firmware file to ev-fw.bin, and copy the file to the SD card.
2. Insert the card into the camera's SD card slot.
3. Power on the camera, and wait about 1 minute.
4. The green power LED will flash quickly during the upgrade, become stable briefly and slowly
blink while performing a reboot.
5. Check IP Scan to verify the camera is
available (IP address may have
changed to factory default,
192.168.1.2).
6. Remove the SD card.
7. After web UI access is once again
available, review the System
Information page to verify the
upgrade has completed successfully.
3 1