DW megapix DWC-MB950TIR Instruction Manual page 28

WEBVIEWER*
S e t u p > S y s t e m > G e n e r i c S e t t i n g s
U s e t h e G e n e r i c S e t t i n g s P a g e t o m o d i f y t h e c a m e r a ' s N a m e , D a t e &
T i m e f o r m a t , S e n s o r I n p u t T y p e , L E D M a n a g e m e n t , H T T P P o r t S e t u p
a n d L a n g u a g e S e l e c t i o n .
LED- The camera LED lights can be enabled or disabled.
The bullet model has an additional setting which controls operation of an external IR LED
source.
The External IR Output Level controls the circuit voltage which is used to turn on/off the
external IR LED.
NOTE: Refer to the external IR LED manufacturer's recommendation to properly set the
External IR Output Level.
Low = Active Low: no voltage turns on the external IR LED; voltage turns off the IR LED
High = Active High: voltage turns on the
external IR LED; no voltage turns off
the IR LED
HTTP Port- To use a non-default port,
change the HTTP Port value. This port
is used by the camera's web server
and HTTP streaming.
Language- Currently English, Simplified
Chinese, Czech, French, German,
Russian and Italian are available.
2 8